UK Toy Safety Regulations Updated: Key Revisions to EN 71-1, EN 71-3 and EN 71-13 Effective 13 February 2026
On 13 February 2026, the UK Department for Business and Trade issued Notice 0131/26, officially updating the designated standards referenced in the UK Toy (Safety) Regulations 2011 (UK TSR, S.I.2011 No.1881). The revision primarily involves the amendment and incorporation of three core standards: EN 71-1, EN 71-3 and EN 71-13, with a clear transition arrangement for the old and new standards also released.
This update has a direct impact on UK toy manufacturers, importers, their upstream suppliers and distributors. As a pivotal adjustment to the compliance system of the UK toy market, it aligns with the latest EU toy safety standards and sets new technical specifications for toy products entering the UK market.
Core Adjustments: Three Standards with Focused Revisions, Effective 13 February 2026
The core of this regulatory update lies in the optimization and upgrade of three fundamental toy safety standards. EN 71-3 and EN 71-13 have launched newly revised versions and been listed as designated standards, while EN 71-1 supplements technical specifications for specific toy categories. All three adjustments took formal effect on 13 February 2026.
EN 71-1:2014+A1:2018
Special specifications for wave rollers have been added. It is clearly stated that for this type of ride-on toys for children, whose steering and propulsion are controlled by feet with accessible wheels during use, the definition of drive units and relevant safety requirements do not apply to the presumptive compliance basis of the original standard. Such products must independently meet the basic safety clauses of UK TSR, filling the regulatory gap for specific toy categories.
EN 71-3:2019+A2:2024
It replaces the old version EN 71-3:2019+A1:2021 as the designated standard for Migration of Certain Elements. Focusing on the migration control of heavy metals and harmful elements in toy materials, it serves as the core standard for toy chemical safety.
EN 71-13:2021+A2:2024
It supersedes EN 71-13:2021+A1:2022 and sets more stringent safety requirements for olfactory board game toys, cosmetic kit toys and gustatory game toys, covering the full dimensions of such toys including packaging, ingredients and usage safety.
The UK authorities have also defined a clear transition period: the old versions EN 71-3:2019+A1:2021 and EN 71-13:2021+A1:2022 may continue to be used until 15 June 2027, and will be officially withdrawn from 16 June 2027, no longer serving as the designated standards of UK TSR. Relevant enterprises are required to complete product compliance transition within the transition period.
In-depth Interpretation: Core Technical Changes of the Two Newly Revised Standards
The newly incorporated EN 71-3:2019+A2:2024 and EN 71-13:2021+A2:2024 are the latest revised versions released by the European Committee for Standardization (CEN). Compared with the old versions, they have achieved key optimizations in testing methods and safety requirements, making them more in line with the actual scenarios of toy production and use.
EN 71-3:2019+A2:2024: Streamlining Testing Processes and Optimizing the Judgment Logic for Element Migration
As the core specification for the migration of certain elements in toys, this revision focuses on the accuracy of testing methods and judgment efficiency, with the key changes including:
- Removing the dewaxing step for products containing grease, oil, wax or similar materials, solving the problem of poor reproducibility of test results caused by the original step and improving the accuracy of detection data;
- Allowing the use of migration results of total chromium (Cr) to presume compliance with the migration limits of chromium (III) (Cr(III)) and chromium (VI) (Cr(VI)), and migration results of total tin (Sn) to presume compliance with the limits of organic tin, streamlining the testing process while retaining judgment rigor;
- Clarifying that mixed testing is a change to the testing method, which may lead to result deviations as it has not been validated by the standard. Mixed testing is prohibited unless the sample cannot be physically separated (e.g., multi-color printed surfaces), standardizing testing operations.
Notably, this standard was released by CEN on 4 December 2024, requiring CEN member states to replace conflicting national standards by the end of June 2025 at the latest. Its incorporation into UK TSR by the UK realizes the synchronous alignment with the European standard system.
EN 71-13:2021+A2:2024: Strengthening the Control of High-risk Categories and Covering Packaging and Ingredient Safety
Considering that olfactory, cosmetic and gustatory toys are easy to contact children's mouth and nose and carry the risk of accidental ingestion/contact, the new standard upgrades requirements from the dual dimensions of packaging safety and ingredient control:
- Revising the requirements for the lids of child-resistant containers to reduce the risk of children opening the packaging by mistake and contacting internal materials;
- Adding requirements for the maximum content of flammable liquids in olfactory board game toys, preventing fire and contact hazards from the source;
- Aligning with the EU Cosmetics Regulation (EC1223/2009), strictly controlling sensitizing fragrances, preservatives, heavy metals and other ingredients, covering the entire chain of raw materials, formulations and packaging of toy cosmetics.
This standard was released by CEN on 20 November 2024, with CEN member states required to update national standards by the end of May 2025 at the latest. Its incorporation by the UK further unifies the safety requirements for such toys between the UK and the EU.
Compliance Framework: The Latest Structure of the UK Toy Standard List (February 2026)
Supplementary notes to the latest UK toy standard list focus on two key compliance reminders:
- For Clause 3.19 (Definition of "drive unit") and Clause 4.15.1 for wave rollers (ride-on toys for children with foot-controlled steering and propulsion and accessible wheels during use), EN 71-1:2014+A1:2018 does not constitute a presumptive basis for compliance with the basic safety requirements set out in paragraph 2 of regulation 10 of the UK TSR (S.I. 2011 No. 1881) and paragraph 3 of Part I of Schedule 2 to the Regulations.
- The limits in point a of Table 2 of Clause 4.2 of EN 71-12:2016 (i.e., the limits for elastomer toys intended for children under 36 months and intended or likely to be placed in the mouth) are lower than the compliance limits specified in point 8 of Part III of Annex II to the UK TSR (S.I. 2011 No. 1881). Enterprises shall follow the statutory limits of the UK TSR for production and testing.
In addition, the UK authorities have put forward voluntary additional measures for users of the EN IEC 62115 standard regarding toys containing button or coin cell batteries:
- Appropriate warning marks shall be marked on the toy packaging to indicate the presence of such batteries and their related hazards, as well as the measures to be taken in case of battery ingestion or insertion into the body. Appropriate graphical symbols should be considered to accompany these warning marks.
- Where practicable and appropriate, pictogram warnings and/or hazard marks shall be placed on toys containing button or coin cell batteries.
- Information on the symptoms of button or coin cell battery ingestion and instructions to seek immediate medical attention if such ingestion is suspected shall be provided in the toy's accompanying instruction manual (or on the packaging).
- If a toy is supplied with button or coin cell batteries that are not pre-installed in the battery compartment, the batteries shall be provided in child-resistant packaging with appropriate warning marks on the packaging.
- When using button or coin cell batteries, ensure that a permanent and clear pictogram warning is marked on their surface, clearly indicating that such batteries should be kept out of the reach of children or vulnerable groups.
Compliance Recommendations from RTS: Three Core Preparations During the Transition Period
In response to this regulatory update, the UK authorities have clearly required manufacturers, importers and their upstream suppliers to conduct compliance assessments in advance. Combined with the transition arrangement, relevant enterprises should focus on the following key work:
- Complete Product Testing and Standard Transition
Prioritize product testing in accordance with the new versions EN 71-3:2019+A2:2024 and EN 71-13:2021+A2:2024 with immediate effect. For categories affected by the adjustment of EN 71-1 such as wave rollers, independently verify whether they meet the basic safety requirements of UK TSR to avoid the misunderstanding of presumptive compliance.
- Improve Supply Chain and Document Management
Request upstream suppliers to provide material test reports complying with the new standards, specifying the compliance of key indicators such as heavy metals, organic tin and flammable liquids; simultaneously update product technical files and Declarations of Conformity (DoC), mark the new standard numbers to ensure document traceability.
- Pay Attention to Additional Requirements for High-risk Categories
For toys containing button/coin cell batteries, take voluntary safety measures in accordance with the requirements of the EN IEC 62115 standard, including marking warning signs on packaging, adding pictogram warnings on the toy itself, specifying the symptoms of accidental ingestion and medical treatment prompts in the instruction manual, and using child-resistant packaging for non-pre-installed batteries to reduce safety risks.
- Coordinate Inventory and Production Planning
Reasonably plan the inventory digestion of products manufactured in accordance with the old standards and gradually switch to production under the new standards before the end of the transition period on 15 June 2027, to avoid products being unable to enter the market due to standard invalidation after the transition period.
Conclusion
This update of the UK Toy Safety Regulations is not only an alignment with the latest EU toy safety standards but also a further improvement of the compliance system of the UK local toy market. It focuses on strengthening the control of chemical safety and physical safety of specific categories, reflecting higher requirements for children's toy safety.
For toy enterprises laying out the UK market, it is necessary to take this standard update as an opportunity to quickly complete product compliance assessment and testing, realize the transition of production and supply chain relying on the transition period, and pay attention to the update dynamics of other standards in the EN 71 series to ensure that products meet the requirements of UK TSR in all dimensions. Only with advance layout and strict compliance can enterprises successfully enter the UK market and achieve sustainable development.



